Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 8

Trial Purpose:

To identify additional solvents that may be more effective in removing varnish from steel coupons than the previously identified solvents.

Date Run:

07/27/2023

Experiment Procedure:

Two pre soiled tools were supplied to TURI by L.S. Starrett.  These tools were used instead of coupons to see how several solvents would effect more accurately soiled parts (the varnish of the coupons soiled in the lab end up being thicker than they are at L.S. Starrett).  Sections of the tool were marked off for each solvent to applied to a corresponding section.  The section of the tool was manually wiped, while being timed.  The sections were wiped until completely clean and the time it took for this to occur was recorded.  The solvents used were !. D Limonene 85% + Dimethyl Glutarate 15%, B. Benzyl Alcohol 63% + Ethyl Lactate 37%, C. Fatty Acid Methyl Ester 93% + Ethyl Lactate 7%, D. T-Butyl Acetate 42% + Benzyl Benzoate 58%.

Trial Results:

A: 3 seconds for all varnish to be removed

B: 40 seconds for all varnish to be removed

C: 30 seconds for all varnish to be removed

D: 10 seconds for all varnish to be removed

Success Rating:

Results successful using TACT (time, agitation, concentration, and temperature, as well as rinsing and drying) and/or other cleaning chemistries examined.

Conclusion:

Solvents A. D Limonene 85% + Dimethyl Glutarate 15%, C. Fatty Acid MEthyl Ester 93% + Ethyl Lactate 7%, and D. T-Butyl Acetate 42% + Benzyl Benzoate 58% show promise to be tested using unheated immersion.

Save Report as a PDF