Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 308

Trial Purpose:

Laboratory evaluations of alternative cleaning products

Date Run:

01/06/2004

Experiment Procedure:

Basic cleaning performance testing was conducted using ASTM G122 as the bases for cleaning. 
Seven products were heated to 130 F on a hot plate and one product was used at full strength. Twenty-four preweighed coupons were coated with Cutting Fluid - Remi Corp Re Lion and allowed to dry for a half an hour and reweighed. Three coupons were cleaned in each solution for 5 minutes using stir-bar-agitation, rinsed in a tap water bath for 15 seconds at 120 F and dried using air blow off for 30 seconds at 68 F. Coupons were allowed to dry for a half an hour and then reweighed a final time. Efficiencies were calculated.

Success Rating:

Preliminary compatibility tests on substrate coupons encouraging for at least one cleaning chemistry. More in-depth laboratory testing necessary.

Conclusion:

6 out of 8 products were effective at removing the contaminant at an efficiency rate of >99%

Save Report as a PDF