CleanerSolutions Database
Toxics Use Reduction Institute · Surface Solutions Laboratory
 
Toxics Use Reduction Institute




Surface Solutions Laboratory

Trial Report



Trial Number 310

(Client Number 153, Project Number 1)

Trial Purpose: Laboratory evaluations of alternative cleaning products

Date Run: 01/07/04

Experiment Procedure:
04-SS-CF-15-3-331 one product was heated to 130 F on a hot plate and two products were used at full strength.. Nine preweighed coupons were coated with Cutting Fluid - Remi Corp ReLion and allowed to dry for a half an hour and reweighed. Three coupons were cleaned in each solution for 5 minutes using stir-bar-agitation, rinsed in a tap water bath for 15 seconds at 120 F and dried using air blow off for 30 seconds at 68 F. Coupons were allowed to dry for a half an hour and then reweighed a final time. Effeciencies were calculated.

Trial Results


Success Rating
Lab evaluation based on vendor data.

Conclusion
2 out of 3 products were effective at removing the contaminant at an efficiency rate of over 86%