Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 4

Trial Purpose:

To evaluate supplied alternative product on removing coating from golf ball

Date Run:

09/08/2006

Experiment Procedure:

The product used at full strength and was heated to 120 and 150 F in a 40 kHz ultrasonic tank. One golf ball was cleaned at each temperature for 40 minutes. At ten minute intervals of the cleaning, the ball was rinsed in a tap water spray for 15 seconds at 120 F and wiped dry with a paper towel. Observations were made and compared to the client's current cleaner.

Trial Results:

Temp Time Observation
120 10 No signs of removal
120 20 Some ink could be wiped off
120 30 Some coating removed
120 40 Not shiny but still had ink remaining
     
150 10 Comparable to the 40 minutes of cleaning at 120F
150 20 Still not a lot of ink removal
150 30 Coating "cracking" and ink was dull
150 40 Lots of "cracking" in the coating

Success Rating:

A follow up test, usually based on company input.

Conclusion:

Neither temperature resulted in a complete removal of the ink and paint from the golf ball after 40 minutes of ultrasonic cleaning.

Save Report as a PDF