Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 0

Trial Purpose:

To evaluate three supplied products for all purpose cleaning following GS 37 requirements

Date Run:

09/29/2014

Experiment Procedure:

Preweighed ceramic coupons were coated with Hucker's Soil Formulation (Jif Creamy Peanut Butter, Salted Butter, Arrowhead Mills stone ground wheat flour, Egg Yolk, Evaporated milk, distilled water, Printer's ink with boiled linseed oil, Shaws saline solution) using a handheld swab and allowed to dry for 2 hours at room temperature. The contaminated coupons were weighed again to determine the amount of soil added.

A second set of coupons were coated with grease DCC-17 formulated by the following. A mixture of three cooking oils/greases was made. A melt blend of 33% vegetable shortening, 33% lard, 33% vegetable oil and 1% carbon lampblack was made up fresh for the testing. Care was taken in the application of the soil onto the coupons so that light and heavy areas were avoided. Allow the soiled tiles to dry for 24 hours at room temperature. Five reflectance readings were made for each of three soiled tiles to obtain a soiled reference value.

Three coupons were placed into a Gardner Straight Line Washability unit. A Kimberly-Clark Wypal reinforced paper towel was attached to the cleaning sled and soaked with 1 spray of cleaning solution. Each coupon was sprayed once with the same cleaning solution. The cleaning unit was run for 20 cycles (~33 seconds). At the end of the cleaning, coupons were left to dry overnight. After drying, final weights were recorded, efficiencies were calculated and recorded.

Trial Results:

Cleaner  Initial wt Final wt % Removed %Average
Hardwater_3ml/6oz_hucker        
  0.7237 0.0985 86.39  
  0.6951 0.1082 84.43  
  0.6517 0.1244 80.91 83.91
Hardwater_3.75ml/6oz_hucker        
  0.6019 0.0709 88.22  
  0.6374 0.0973 84.73  
  0.6359 0.0848 86.66 86.54
Diwater_3ml/6oz_hucker        
  0.6498 0.1045 83.92  
  0.6776 0.0725 89.30  
  0.6716 0.108 83.92 85.71
Diwater_3.75ml/6oz_hucker        
  0.6594 0.1507 77.15  
  0.6639 0.0727 89.05  
  0.6728 0.0551 91.81 86
         
Cleaner  Initial wt Final wt % Removed %Average
Hardwater_3ml/6oz_dcc-17        
  0.7469 0.1021 86.33  
  0.7870 0.0583 92.59  
  0.4468 0.0326 92.70 90.54
Hardwater_3.75ml/6oz_dcc-17        
  0.8816 0.1439 83.68  
  0.6789 0.0957 85.90  
  0.7172 0.0386 94.62 88.07
Diwater_3ml/6oz_dcc-17        
  0.5063 0.0657 87.02  
  0.5945 0.0864 85.47  
  0.8919 0.0865 90.3 87.6
Diwater_3.75ml/6oz_dcc-17        
  0.4628 0.0673 85.46  
  0.5546 0.0160 97.12  
  0.5741 0.0469 91.83 91.47

Success Rating:

Results successful using TACT (time, agitation, concentration, and temperature, as well as rinsing and drying) and/or other cleaning chemistries examined.

Conclusion:

A cleaning product is considered effective when the efficiency of the product removes 85% of the soil and above. All cleaner concentrations were effective in removal of soil from ceramic surfaces with the highest at about 89% and lowest at about 87%. Higher concentration of Greenworks cleaner resulted in higher removal efficiency. DI water was slightly better at soil removal than hard water.

Save Report as a PDF