Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 1

Trial Purpose:

To evaluate all purpose cleaning formulations at a lower dilution

Date Run:

06/04/2010

Experiment Procedure:

The supplied ingredients were mixed according to the supplied procedures, substituting new surfactant into process. The 3:1 concentrate was diluted 1 part solvent solution to 32 parts water. The cleaning products were diluted with room temperature DI water.

Preweighed ceramic, plastic G-10 and painted steel coupons were coated with Hucker's Soil Formulation (Jif Creamy Peanut Butter 9.2%, Salted Butter 9.2%, Arrowhead Mills stone ground wheat flour 9.2%, Egg Yolk 9.2%, Evaporated milk 13.8%, Distilled water 45.8%, Printer's ink with boiled linseed oil 0.9%, Shaws saline solution 2.7%) using a handheld swab and allowed to dry for 24 hours at room temperature. The contaminated coupons were weighed again to determine the amount of soil added.

Three coupons were placed into a Gardner Straight Line Washability unit. A Kimberly-Clark Wypal reinforced paper towel was attached to the cleaning sled and soaked with 5-7 sprays of cleaning solutions. Each coupon was sprayed 7-10 times with the same cleaning solution. The cleaning unit was run for 20 cycles (~33 seconds).

At the end of the cleaning, coupons were wiped once with a dry paper towel. Final weights were recorded, efficiencies were calculated and recorded.

Trial Results:

All six replacement surfactant mixtures were effective at removing the Hucker’s soil from the three surfaces using manual wiping. Each removed more the current formulation. Each diluted version except H3HCA was less effective than the RTU products tested previously. The control product removed 84%. The table lists the amount of soil added, the amount remaining after cleaning and the calculated efficiency for each coupon cleaned.

Cleaner Initial wt Final wt % Removed
Nutrisol w/ Calsoft L40 Ceramic      
  0.5136 0.3221 37.28
  0.3480 0.0238 93.16
  0.1913 0.0267 86.04
Nutrisol w/ Calsoft L40 Steel      
  0.1518 0.0053 96.51
  0.0724 0.0095 86.88
  0.0884 0.0079 91.06
Nutrisol w/ Calsoft L40 Plastic      
  0.1131 0.0072 93.63
  0.0616 0.0050 91.88
  0.1097 0.0022 97.99
Nutrisol w/ Calsoft AOS40 Ceramic      
  0.1214 0.0145 88.06
  0.1488 0.0142 90.46
  0.2739 0.0332 87.88
Nutrisol w/ Calsoft AOS40 Steel      
  0.1243 0.0055 95.58
  0.0945 0.0158 83.28
  0.1076 0.0024 97.77
Nutrisol w/ Calsoft AOS40 Plastic      
  0.0841 0.0045 94.65
  0.0921 0.0065 92.94
  0.0596 0.0080 86.58
Nutrisol w/ Mirataine H2CA Ceramic      
  0.2278 0.0252 88.94
  0.3399 0.0373 89.03
  0.2117 0.0321 84.84
Nutrisol w/ Mirataine H2CA Steel      
  0.0853 0.0006 99.30
  0.0702 0.0040 94.30
  0.1472 0.0110 92.53
Nutrisol w/ Mirataine H2CA Plastic      
  0.0829 0.0033 96.02
  0.1373 0.0093 93.23
  0.1064 0.0171 83.93
Nutrisol w/ SugaFax D10 Ceramic      
  0.3334 0.0255 92.35
  0.2459 0.0220 91.05
  0.2616 0.0271 89.64
Nutrisol w/ SugaFax D10 Steel      
  0.1830 0.0149 87.61
  0.2107 0.0261 78.28
  0.0884 0.0192 88.78
Nutrisol w/ SugaFax D10 Plastic      
  0.0882 0.0099 89.20
  0.1075 0.0058 86.12
  0.0833 0.0090 83.21
Nutrisol w/ SugaNate 160 Ceramic      
  0.1830 0.0254 87.99
  0.1727 0.0290 82.19
  0.2356 0.0283 86.59
Nutrisol w/ SugaNate 160 Steel      
  0.0994 0.0177 79.50
  0.1402 0.0188 79.60
  0.1434 0.0294 84.66
Nutrisol w/ SugaNate 160 Plastic      
  0.0902 0.0184 86.25
  0.1232 0.0189 94.66
  0.1331 0.0183 94.95

Success Rating:

A follow up test, usually based on company input.

Conclusion:

All possible replacement surfactant mixtures removed over 85% of the Hucker's soil, compared well with the conventional product and outperformed the supplied control product.

Save Report as a PDF