Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 455

Trial Purpose:

To test nontoxic industrial cleaning solutions for oil removal.

Date Run:

10/03/2008

Experiment Procedure:

Basic cleaning performance testing was conducted using ASTM G122 as the bases for cleaning. 

Products were based on the compatibility of substrate and removal of foreign substance. Used 5% concentration and heated the samples at 135F. The coupons were immersed in a product for 5 minutes, rinsed for 30 seconds in tap water at 120F and dried in 30 seconds using compressed air is room temperature. Coupons were coated with used motor oil. Using a handheld swab and allowed to dry for 24 hours at room temperature. The contaminated coupons were weighed again to determine the amount of soil added. After cleaning process, the final weights were recorded, efficiencies were calculated and recorded.

Trial Results:

Cleaner Initial wt Final wt % Removed
Brulin Corporation Formula 815MXAA
  0.1091 0.0795 27.13
  0.2255 0.1128 49.98
  0.1973 0.1500 23.97
Ecolink Heavyweight
  0.2446 0.1210 50.53
  0.3190 0.0591 81.47
  0.3061 0.1144 62.63
Chem Free Corporation SW6 Metals degreasing solution
  0.3545 0.1929 45.59
  0.1714 0.1652 3.62
  0.3329 0.2089 37.25
A1 Hydro Parke Hill Chemical SW Wash 10 aircraft cleaner
  0.2344 0.1678 28.41
  0.2384 0.1548 35.07
  0.1744 0.0919 47.31
Brulin Corporation Aqua Safe
  0.2970 0.1325 55.39
  0.4681 0.1873 59.99
  0.3897 0.0994 74.49

Success Rating:

Preliminary compatibility tests on substrate coupons encouraging for at least one cleaning chemistry. More in-depth laboratory testing necessary.

Conclusion:

From the given concentration of 5 percent none of the products has surpassed the passing rate of 85 percent removal rate. But there are 4 products out of the five that were tested that show promise of oil removal if the concentration was increased.

Save Report as a PDF