Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 8

Trial Purpose:

Evaluation of additional cleaners for brass brightening

Date Run:

11/19/2001

Experiment Procedure:

Five cleaners were selected from the lab's Vendor Directory. Four products were used at full strength and one was used at 10% (NMP). One part was immersed into each solution for 10 minutes. After soaking, the part was removed from the solution and wiped dry with a paper towel. Observations were made and recorded. Any successful product was then heated to 130 F on a hot plate. A part was again immersed into the solution for 10 minutes. After soaking, the part was wiped dry and observed again.

Trial Results:

The two U.S. Polychemical products, DEOX 007 and Ultra CR, were the very successful in brightening the brass.  The DEOX caused the brass to look more of copper color, although.  The Ultra CR resulted in a bright brass color.  The Chem Tech Solutions Westech CT 4712 brightened the brass, but caused the part to become very copper like in color.  Both of the remaining products, D-Greeze 500 Lo and NMP, were not successful.  The following table lists the observations made.

Table 1.  Brightening Observations

Product Room Temp Observations Heated Observations
DEOX 007  Brighten part some More of a brass like color  
  The wipe turned blue  
  Part copper color  
  More blue on wipe  
D-Greeze Solution turned green Not Tested
  Part only some what brighter  
NMP Little brightening Not Tested
  Some blue/green on wipe  
Ultra CR Brighten Good brightening
  Removed grime Brass color
    Cleaner looking
Westech Shiny, Copper color Not tested

Success Rating:

Results successful using TACT (time, agitation, concentration, and temperature, as well as rinsing and drying) and/or other cleaning chemistries examined.

Conclusion:

The U.S. Polychemical Ultra CR was the best brightener evaluated thus far.  Additional parts will be soaked in the Ultra CR.

Save Report as a PDF