Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 0

Trial Purpose:

Contact angle goniometery measurements

Date Run:

01/14/2002

Experiment Procedure:

Two supplied papers were cut into 2" x 4" samples and clamped to aluminum coupons of same size. Each sample was analyzed using laser contact goniometery. A 2 microliter drop of DI water was placed on the surface of the sample with the syringe. The sample was positioned with the control knobs so that the laser skims over the surface of the sample and through the location where the water droplet meets the sample surface. Two lines should appear on the measurement card. The angle between these two lines is the angle of contact between the water droplet and the sample. Two contact angle measurements were made per sample.

Sample 1: Norpel 7624
Sample 2: Cartafluor UHC

Trial Results:

A total of 5 Norpel and 3 Cartafluor samples were analyzed using contact angle goniometry. From the measured angles, it was found that Norpel had an average contact angle of 68.3 while the Cartafluor had an average of 53. Table 1 lists the individual measurements for both paper samples.

Table 1. Contact Angle Measurements

Norpel 7624  
1 48
1a  
2 80
2a 72
3 80
3a 54
4 64
4a 66
5 73
5a 68
Average 68.3
Cartafluor UHC  
1 49
1a 48
2 61
2a 59
3 48
Average 53

Success Rating:

A cleanliness study, addressing only various analytical techniques.

Conclusion:

With the higher contact angle Norpel would appear to be more water resistant than the Cartafluor.

Save Report as a PDF