Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 8

Trial Purpose:

To evaluate ultrasonic energy for cleaning the supplied parts.

Date Run:

01/22/2004

Experiment Procedure:

One product was used at 10%, diluted with DI water and heated to 120 F. The solution was poured into a Branson 200 ultrasonic cleaning system and de-gassed for five minutes. One part was immersed into the solution and cleaned for 10 minutes with 40 kHz ultrasonic energy. The part was dried using air blow off at room temperature for 30 seconds.

Trial Results:

Ultrasonics was very effective in cleaning the punch and arbor parts.

Success Rating:

A follow up test, usually based on company input.

Conclusion:

Ultrasonic energy would be an effective method for removing the quench oil and gray film on the punch part and the quench oil from the arbor part.

Save Report as a PDF