Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 14

Trial Purpose:

The purpose of this experiment was to determine the effectiveness of the top two performing cleaners in removing vanishing oil from a company provided solvent cleaned galvanized steel piano hinge.

Date Run:

09/21/2020

Experiment Procedure:

One company provided solvent cleaned galvanized steel piano hinge was obtained. Each end of the hinge would be cleaned using one of the two top performing cleaners. Cleaners were prepared to the following concentrations and temperatures; Mirachem 500 20% 110°F, Shopmaster LPH 20% 130°F. Initial contact angles were obtained for the solvent cleaned hinge. The hinge was then soiled with the vanishing oil. Once solutions reached the proper temperatures, the hinge was submerged for 15 minutes into its respective cleaner. After 15 minutes, the hinge was rinsed in a deionized water bath at 115°F for 20 seconds. The hinge was then dried using an air gun on the hot setting. Cleaned contact angles were obtained and compared to the original solvent. Effectiveness of the cleaners was determined. A white glove test was conducted after cleaning to determine if any residual oil remained or was caught in the hinges.

Trial Results:

Cleaner Initial Contact Angle Initial AVG Final Contact Angle Final AVG
Mirachem 500 64.55 57.69 69.66 64.08
54.96 61.62
53.56 60.97
Shopmaster LPH 65.88 66.69 74.50 70.2
67.50 69.78
65.79 66.33

Success Rating:

Results successful using TACT (time, agitation, concentration, and temperature, as well as rinsing and drying) and/or other cleaning chemistries examined.

Conclusion:

Both cleaners visually removed the vanishing oil, but Shopmaster LPH was the most effective cleaner with an average contact angle of 70.20. The white glove test revealed no residual oil for either cleaner.

Save Report as a PDF