Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 15

Trial Purpose:

To identify potential replacement cleaners for an adhesive contaminant that has been difficult in removing.

Date Run:

11/06/2000

Experiment Procedure:

Eight solutions were selected from the lab’s databases based on past effective cleaning of similar contaminants and vendor supplied information. Table 1 lists the cleaners selected. Each cleaner was poured into a 20 ml glass vial at full strength. The weight of the full container was recorded. A small portion of the adhesive was placed into each vial and weighed again to determine the amount of contaminant that was added.
Observations were made at 10-minute intervals during the first hour of the trial. At the 40-minute mark, the adhesive was removed from the vial. The vial was then reweighed to determine if the adhesive was being dissolved by the solutions or was the adhesive absorbing the cleaners. An increase in weight would signify that the adhesive was being dissolved and with a decrease in vial weight, it could be assumed that the adhesive was gaining weight by absorbing the cleaning solution.
After the first hour, observations were made every hour for a total of six hours. Additional weighing of the vial was taken at three and six hours to determine the extent of the interaction between the solutions and the adhesive.

SUBSTRATE MATERIAL: Liquid (cleaning solution)
CONTAMINANTS: Adhesive- National Starch & Chemical Co Duro-Tak Experimental Product (CAS #s: 108-88-3, 1330-20-7, 64742-88-8)

Trial Results:

Three of the eight cleaners demonstrated dissolving action during the trial. Bio T Max dissolved all of the added adhesive within the first two hours of immersion.  DS-104 took four hours to complete the same task.  The final dissolver was D Greeze 500 LO.  The other five products resulted in increased weights at the three weighing periods.  Table 2 lists the percent weight dissolved/absorbed for each of the solutions evaluated.

Table 2.  Dissolving/Absorbing 
Cleaner Vial V w/ C 40 min 3 hours 6 hours Wt of Adhesive 40 min 3 hrs 6 hrs Mechanism
1 24.6935 26.2415 24.8390 25.7082 25.8393 1.5480 9.40 65.55 74.02 % Dissolved
2 26.3185 27.5650 25.0972 24.6384 24.2175 1.2465 -97.98 -134.79 -168.55 % Absorbed
3 23.6354 24.4545 23.8932 24.3551 X 0.8191 31.47 87.86 X % Dissolved
4 25.7664 27.3111 25.0141 24.5052 24.1574 1.5447 -48.70 -81.65 -104.16 % Absorbed
5 25.4519 26.4086 24.8529 24.3058 23.7153 0.9567 -62.61 -119.80 -181.52 % Absorbed
6 24.6970 25.9200 23.4662 22.8774 22.6854 1.2230 -100.64 -148.78 -164.48 % Absorbed
7 27.1368 28.6917 25.7088 24.8834 24.5203 1.5549 -91.84 -144.92 -168.27 % Absorbed
8 22.9946 24.5722 22.7374 23.3378 23.8792 1.5776 -16.30 21.75 56.07 % Dissolved
        2 hours 3.5 hours          

The visual observations made for the 11 time periods are recorded in Table 3.  The ranking of the cleaning chemistries: Bio T Max (3, Dissolve) > DS-104(1, Dissolve) > Safe Strip(2, Absorb), D-Greeze 500 LO (8, Dissolve) > SI No 8 (7, Absorb) > Concrete/Graffiti Remover (6, Absorb) > SC Supersolve (4, Absorb) > Biosolve (5, Absorb).

 

Table 3.  Observations

Cleaner 10 min 20 min 30 min 40 min 50 min 1 hr 2 hr 3 hr 4 hr 5 hr 6 hr Score Rating
1 (Dissolve) P F G/E E E E E E Gone X X 48.5 80.17
2 (Absorb) F F/O G G E E E E E E E 47.5 78.51
3 (Dissolve) F F/O G/E E E E Gone X X X X 51.0 84.30
4 (Absorb) F F P F O O F/O O O/G O/G G 29.5 48.76
5 (Absorb) P P F O O O F/O O O F/O O 28.0 46.28
6 (Absorb) F F F O O G G G O/G O O/G 34.0 56.20
7 (Absorb) F F F F O O/G G G/E E G/E E 37.5 61.98
8 (Dissolve) P P O G G G G/E E E E E 41.6 68.76

Scoring System:   Excellentè Good è Okay è Fair-è Poor 

E= 5, G/E = 4.5, G =4, O/G = 3.5, O = 3, F/O = 2.5, F = 2, P/F = 1.5, P = 1

X - not evaluated = 5.5, Gone = E

Rating = (Score/Maximum Score) x 100%  (Max Score = 11*5.5 = 60.5)

Success Rating:

Results successful using TACT (time, agitation, concentration, and temperature, as well as rinsing and drying) and/or other cleaning chemistries examined.

Conclusion:

Three cleaners were effective dissolvers and five were absorbers.  Each product showed signs of altering the appearance of the adhesive.  The final overall rating of the cleaning chemistries is as follows: Bio T Max 84.30%, DS-104 80.17%, Safe Strip 78.51%, D-Greeze 500 LO 68.76%, SI No 8 61.98%, Concrete/Graffiti Remover 56.20%, SC Supersolve 48.76% and Biosolve 46.28%.

Save Report as a PDF