Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 1

Trial Purpose:

To evaluate previously tested products using ultrasonic energy.

Date Run:

08/17/2006

Experiment Procedure:

Four products from the previous trial were diluted to 5% in 250 ml beakers using DI water and heated to 130 F in a Brason 3510 ultrasonic tank and degassed for 5 minutes.

Twelve preweighed coupons were coated with the green buffing compound using a hand held swab after heating to its melting point with a heat gun. Coupons were weighed a second time to determine the amount of buffing compound added. Three coupons were cleaned in each solution for five minutes using 40 kHz ultrasonic agitation. Coupons were rinsed for 15 seconds in a tap water bath at 120 F and dried using a dry compressed air for 30 seconds. Once dry coupons were weighed a final time and product efficiencies were calculated.

Trial Results:

Ultrasonic cleaning improved the efficiency for two of the four products tested. Both Daraclean 283 and Polyspray Jet 790 XS removed 70 and 86% of the buffing compound after five minutes of ultrasonic cleaning. The following table lists the amount of buffing compound applied, the amount remaining and the efficiency for each coupon cleaned.

Cleaner Initial wt Final wt % Removed
Daraclean 283 0.2243 0.0117 94.78
  0.3470 0.1031 70.29
  0.5817 0.3084 46.98
Inproclean 3800 0.5119 0.3280 35.92
  0.1132 0.0004 99.65
  0.6942 0.3628 47.74
Beyond 2001 0.4965 0.1676 66.24
  0.5220 0.2934 43.79
  0.4332 0.1706 60.62
Polyspray Jet 790 XS 0.1408 0.0040 97.16
  0.3748 0.0503 86.58
  0.8823 0.2177 75.33

Success Rating:

A follow up test, usually based on company input.

Conclusion:

Longer cleaning times or increased temperature should improve cleaning efficiency for the top two cleaners. These cleaners will be used on the next supplied buffing compound.

Save Report as a PDF