Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 0

Trial Purpose:

To evaluate selected cleaners on supplied brass belt buckles using ultrasonic cleaning.

Date Run:

09/06/2006

Experiment Procedure:

Three products from the lab's database were selected based on client supplied information. The products were diluted to 5% in 250 ml beakers using DI water and immersed in a hot water bath at 130 and degassed for five minutes in a Branson 3510 ultrasonic 40 kHz unit.

One supplied dirty buckle was cleaned in each solution for five minutes using 40 kHz ultrasonic agitation. Buckles were rinsed for 15 seconds in a tap water bath at 120 F and dried using a dry compressed air for 30 seconds. Buckles were visually inspected for cleanliness.

Trial Results:

Cleaner Observation
MC 132 Solution turned red from buffing compound.   Initially, buckle looked clean and free of contamination. After sitting for a few hours, brown marks began showing up.
Polyspray Jet 790 XS Solution turned a light brown from buffing compound. Part looked clean and no spots showed up.
Detergent 8 Solution turned a milky pink from buffing compound. Part looked very clean and no spots showed up.

Success Rating:

Results successful using TACT (time, agitation, concentration, and temperature, as well as rinsing and drying) and/or other cleaning chemistries examined.

Conclusion:

Two products were found to work on the supplied brass buckles using ultrasonic energy. With the products successful on the buffing compound, the next step will be to evaluate these cleaners on supplied additional parts at or after workshop.

Save Report as a PDF