Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 0

Trial Purpose:

Preliminary testing

Date Run:

05/10/1995

Experiment Procedure:

Preliminary testing was done for a Musical Instrument Refinisher. Eight 260 brass coupons were contaminated with four contaminants (Clover Grease Mix Lapping Oil, Valvoline Wheel Bearing Grease, 90 Wt Gear Oil, and Selmer Tuning Slide and Cork Grease.) Each contaminant was spread on two coupons. Six possible cleaners were drop tested on the contaminated coupons. The cleaners were:
1) Sky Products Cleaner #10
2) Calgon Geo Guard #2215
3) Chem Tech Ct-10
4) Grace #211
5) Grace #212
6) Oakite #3800
One drop of each concentrated cleaner was placed on each contaminant to notice the lift that each cleaner was able to obtain in a set time. The time depended on the contaminant. Cleaner effects on the Gear oil and Selmer Grease were noticable instantly while the cleaners for the Lapping Oil abd the bearing grease were allowed to sit for a half an hour.

Trial Results:

The results were as follows:
1) Lapping Oil- The Calgon Geo Guard did the best with Oakite doing the second best and Chem Tech showing some slight lift. All Other cleaners showed no lift at all. The Calgon Geo Guard seemed to leave some residue on the brass coupon.
2) Valvoline Bearing Grease- The Grace 212 Cleaner got the best lift, then the Calgon Geo-Guard while all other cleaners showed little lift.
3) 90 WT Gear Oil- The Calgon Geo-Guard, the ChemTech and the Grace 211 all performed excellent, with the rest of the cleaners showing pretty good lift. This appears to be the easiest compound to remove.
4) Selmer Cork Grease- The ChemTech and the Grace 211 performed the best with all other cleaners showing a slight lift.

Success Rating:

Preliminary compatibility tests on substrate coupons encouraging for at least one cleaning chemistry. More in-depth laboratory testing necessary.

Conclusion:

From the lift test, it was decided that we would further test the three that performed best on the Lapping Oil and the Valvoline bearing Grease.  This ended up being the Calgon Geo-Guard 2215, the Oakite 3800 and the Sky Cleaner #10.

Save Report as a PDF