Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 3

Trial Purpose:

Solve problem of the spottin from the last trial

Date Run:

08/07/1995

Experiment Procedure:

Trials #1 and #2 will use the Oakite Inproclean #3800 in a stir-bar agitated beaker and the Crest ultrasonic unit respectively. Trials #3 and #4 will use the Sky Products cleaner #10 in a stir-bar agitated beaker and the Crest ultrasonic unit respectively.
All cleaners and cleaning methods will use the same times and temperatures. Cleaning will take place for 15 minutes at 130 F. Rinsing will be done in a tank of tap water set at 130 F for two minutes. A second rinse in a DI water bath will be performed for one minute at room temperature. During rinsing the tubes will be agitated quite a bit to make sure they fill up with water. The parts will then be dried under air knives for one minute and then in a convection oven set at 170 F for thirty minutes. For all cleanings and rinsing the tubes will be positioned that the hole side is facing up at a 25-degree angle. If needed the tubes will be agitated enough so that they completely fill up with cleaner or water.
After cleaning the parts will be allowed to cool down and visually inspected for any residual oil. The parts will then be packed away for when Stamping Company arrives on Tuesday.

CLEANING CONDITIONS:

                                                                                                Temperature  

  time (min)  trial #1  trial #2 trial #3 trial #4
Stir-bar agitation 15 138   134  
Ultrasonics 15   134   135
RINSE/TAP H2O 2 128 128 128 132
RINSE/DI H2O 1 76 76 76 76
DRY air knives 2 room room room room
DRY convection oven 30 172 165 169 171

Trial Results:

Parts look very clean on the outside, the ultrasonics more than the agitated immersion.  The results for the swab test were the same as Friday's trial.

Success Rating:

Results successful using TACT (time, agitation, concentration, and temperature, as well as rinsing and drying) and/or other cleaning chemistries examined.

Conclusion:

It seems that the Deionized rinse has solved the problem of the spotting.

Save Report as a PDF