Browse past lab clients by general industry sectors
Additive Manufacturing
Project Number 1
Test Objective:
Identify alternatives for cleaning post-printed parts of uncured resin before post-cure.Product Use:
Printing parts| Trial Number | Date Run | Purpose | Success Rating |
|---|---|---|---|
| 0 | 11/24/2019 | To identify the Hansen solubility parameters of grey, grey pro, high temp, elastic, and tough resins. | Preliminary compatibility tests on substrate coupons encouraging for at least one cleaning chemistry. More in-depth laboratory testing necessary. |
| 1 | 01/03/2021 | The purpose of this experiment was to determine the effectiveness of baseline solvents in removing soil from 3D printed coupons via unheated immersion. | Results successful using TACT (time, agitation, concentration, and temperature, as well as rinsing and drying) and/or other cleaning chemistries examined. |
| 2 | 01/03/2021 | The purpose of this experiment was to determine the effectiveness of baseline HSPiP solvents in removing soil from 3D printed coupons via unheated immersion. | Results successful using TACT (time, agitation, concentration, and temperature, as well as rinsing and drying) and/or other cleaning chemistries examined. |
| 3 | 01/05/2021 | The purpose of this experiment was to determine the effectiveness of baseline solvents in removing soil from 3D printed coupons via unheated immersion. | Results successful using TACT (time, agitation, concentration, and temperature, as well as rinsing and drying) and/or other cleaning chemistries examined. |