Browse past lab clients by general industry sectors
Trial Purpose:
To evaluate the effectiveness of SB-33 (a D limonene and Dimethyl Glutarate mixture) and SB-10 (a t-butyl acetate and Benzyl benzoate mixture) in removing several production oils and greases from stainless steel coupons as a potential replacement for TCE unheated immersion cleaning method.
Date Run:
04/26/2023Experiment Procedure:
Three stainless steel coupons were used for each of the five soils being tested for a total of 15 coupons. The initial weights of each coupon were recorded. The bottom third of every coupon was soiled by applying the corresponding soil with a swab. The dirty weights of each coupon were then recorded. The coupons were then subjected heated immersion in SB-33 and SB-10 with the stir bar at 200rpm for 15 mins at 130F. After the coupons were cleaned, they dried with a heat gun for about 2 minutes each. The next morning, the clean weights of each coupon were taken
Soil | Use | CAS |
Milform OAK 7a International | Stamping and drawing fluid | 64742-53-6 / 68909-65-9 |
M4 | ||
Milform Oak 15c | Metalworking oil | 64742-52-5 / 64742-53-6 |
Milform Oak 15a | Metalworking oil | 64742-44-5 / 64742-52-5 / 64742-55-8 |
Milform Oak 529 | Evaporative lubricant | 68551-17-7 / 123-95-5 / 127087-87-0 |
Trial Results:
Cleaner | Soil | Initial wt of cont. | Final wt of cont. | %Cont Removed | % AVG | % Overall |
SB-33 | Oak 7a international | 0.0390 | 0.0013 | 96.67 | 93.49 | 84.64 |
0.0876 | 0.0107 | 87.79 | ||||
0.0677 | 0.0027 | 96.01 | ||||
M4 | 0.3285 | 0.0090 | 97.26 | 98.29 | ||
0.2656 | 0.0027 | 98.98 | ||||
0.4822 | 0.0066 | 98.63 | ||||
Oak 15c | 0.0467 | 0.0019 | 95.93 | 97.40 | ||
0.1117 | 0.0016 | 98.57 | ||||
0.1748 | 0.0040 | 97.71 | ||||
Oak 15a | 0.0890 | 0.0014 | 98.43 | 98.27 | ||
0.1177 | 0.0010 | 99.15 | ||||
0.1116 | 0.0031 | 97.22 | ||||
Oak 529 | 0.0071 | 0.0043 | 39.44 | 34.81 | ||
0.0059 | 0.0035 | 40.68 | ||||
0.0037 | 0.0028 | 24.32 | ||||
SB-10 | Oak 7a international | 0.0424 | 0.0063 | 85.14 | 94.45 | 93.47 |
0.0804 | 0.0011 | 98.63 | ||||
0.0699 | 0.0003 | 99.57 | ||||
M4 | 0.3605 | 0.0006 | 99.83 | 98.63 | ||
0.2962 | 0.0022 | 99.26 | ||||
0.3696 | 0.0118 | 96.81 | ||||
Oak 15c | 0.0721 | 0.0069 | 90.43 | 87.30 | ||
0.1227 | 0.0162 | 86.80 | ||||
0.1155 | 0.0177 | 84.68 | ||||
Oak 15a | 0.1725 | 0.0085 | 95.07 | 94.56 | ||
0.1763 | 0.0106 | 93.99 | ||||
0.1891 | 0.0102 | 94.61 | ||||
Oak 529 | 0.0090 | 0.0006 | 93.33 | 91.41 | ||
0.0076 | 0.0012 | 84.21 | ||||
0.0303 | 0.0010 | 96.70 |
Success Rating:
Results successful using TACT (time, agitation, concentration, and temperature, as well as rinsing and drying) and/or other cleaning chemistries examined.Conclusion:
SB-33 is an effective alternative to TCE in removing all soils except for M4 using heated immersion. SB-10 is an effective alternative to TCE in removing all soils using heated immersion