Browse past lab clients by general industry sectors
Trial Purpose:
To evaluate five new products on the fourth supplied soil.
Date Run:
04/30/2004Experiment Procedure:
Five products were selected based on client request for vapor degreasing solvents. Each product was used at full strength in a 250 ml beaker and heated to 96 F on a hot plate. Fifteen preweighed aluminum coupons were coated with the C.P. Hall Co. Plasthall ESO oil (8013-07-8) using a hand held swab. Coupons were weighed a second time to determine the amount of soil added to each coupon. Three coupons were cleaned in each solution for 5 minutes using stir-bar agitation. After cleaning parts were allowed to sit for 10 minutes for drying at room temperature. The coupons were weighed a final time and efficiencies were calculated.
Trial Results:
All five products removed over 98% of the second soil. The table lists the amount of soil added, the amount remaining and the efficiency for each coupon cleaned.
Cleaner | Initial wt | Final wt | % Removed |
Ensolv | 0.2123 | 0.0006 | 99.72 |
0.0666 | 0.0000 | 99.92 | |
0.1815 | 0.0013 | 99.28 | |
Ensolv A | 0.0677 | 0.0023 | 96.60 |
0.4607 | 0.0009 | 99.80 | |
0.2123 | 0.0021 | 99.01 | |
Metalnox M6960 | 0.3355 | 0.0022 | 99.34 |
0.1881 | 0.0004 | 99.79 | |
0.2439 | 0.0011 | 99.55 | |
Flux Remover | 0.4319 | 0.0030 | 99.31 |
0.1482 | 0.0045 | 96.96 | |
0.1594 | 0.0032 | 97.99 | |
Heavy DutyDegreaser C | 0.2590 | 0.0032 | 98.76 |
0.1133 | 0.0042 | 96.29 | |
0.2668 | 0.0005 | 99.81 |
Success Rating:
A follow up test, usually based on company input.Conclusion:
Eleven products have been tested on four soils using immersion cleaning. The next step in the evaluation will be to test products via vapor degreasing.