Browse past lab clients by general industry sectors
Trial Purpose:
To evaluate supplied product for all purpose cleaning
Date Run:
11/25/2008Experiment Procedure:
The supplied cleaning product was used at the supplied concentration (20:1). A second product, selected by the lab, was diluted with DI water to vendor recommended dilution (128:1) for all purpose cleaning. Preweighed ceramic were coated with Hucker's Soil Formulation (Jif Creamy Peanut Butter 9.2%, Salted Butter 9.2%, Arrowhead Mills stone ground wheat flour 9.2%, Egg Yolk 9.2%, Evaporated milk 13.8%, Distilled water 45.8%, Printer's ink with boiled linseed oil 0.9%, Shaws saline solution 2.7%) using a handheld swab and allowed to dry for 24 hours at room temperature. The contaminated coupons were weighed again to determine the amount of soil added.
Three coupons were placed into a Gardner Straight Line Washability unit. A Kimberly Clark Reinforced paper towel was attached to the cleaning sled and soaked with 5-7 sprays of cleaning solutions. Each coupon was sprayed 7-10 times with the same cleaning solution. The solution was allowed to penetrate for 30 seconds followed by cleaning in the SLW unit for 20 cycles (~33 seconds). At the end of the cleaning, coupons were wiped once with a dry paper towel. Final weights were recorded, and efficiencies were calculated and recorded.
Trial Results:
Both the supplied product and industry product were effective in removing the Hucker's Soil with a manual wiping action. The table lists the amount of soil initially added and the amount remaining after cleaning and the product efficiency for each coupon cleaned.
Cleaner | Initial wt | Final wt | % Removed |
H2O2-ceramic | 0.2179 | 0.0650 | 70.17 |
0.4540 | 0.0973 | 78.57 | |
0.0278 | 0.0018 | 93.53 | |
H2O2-steel | 0.2052 | 0.0360 | 82.46 |
0.3800 | 0.0394 | 89.63 | |
0.2654 | 0.0342 | 87.11 | |
H2O2-plastic | 0.4010 | 0.0095 | 97.63 |
0.3011 | 0.0236 | 92.16 | |
0.3396 | 0.0233 | 93.14 | |
Heavy Duty-ceramic | 0.5248 | 0.0855 | 83.71 |
0.3788 | 0.0348 | 90.81 | |
0.4649 | 0.0980 | 78.92 | |
Heavy Duty-steel | 0.4396 | 0.0558 | 87.31 |
0.3631 | 0.0432 | 88.10 | |
0.1365 | 0.0534 | 60.88 | |
Heavy Duty-plastic | 0.3503 | 0.0117 | 96.66 |
0.1709 | 0.0201 | 88.24 | |
0.3491 | 0.0167 | 95.22 |
Success Rating:
A follow up test, usually based on company input.Conclusion:
The supplied product had an overall average efficiency greater than 85% and would be considered effective based on the SSL testing methodology.