Browse past lab clients by general industry sectors
Trial Purpose:
The purpose of this experiment was to confirm removal results from Trial #8.
Date Run:
09/14/2020Experiment Procedure:
Three general steel TURI coupons were obtained for each of the four cleaners tested. The cleaners were prepared to the following conditions: Metalnox 6386 100% concentration room temperature, Mirachem 500 20% concentration 110°F, SC Aircraft & Metal Cleaner 20% concentration 130°F, and Shopmaster LPH 20% concentration 130°F. An initial weight was recorded for each coupon, then coupons were soiled with the Vanishing Oil provided by the company. A soiled weight was recorded and coupons were then submerged into their respective cleaners for 15 minutes. After 15 minutes had passed, cleaners were submerged into a deionized water bath at 115°F for 20 seconds. Coupons were then dried using the hot air gun and a cleaned weight was obtained. Effectiveness of cleaners was then determined.
Trial Results:
Cleaner | Initial wt of cont | Final wt of cont | %Cont Removed | %AVG |
Metalnox 6386 | 0.0364 | 0.0032 | 91.21 | 92.87 |
0.0418 | 0.0059 | 85.89 | ||
0.0663 | -0.0010 | 101.51 | ||
Mirachem 500 | 0.0612 | 0.0018 | 97.06 | 100.85 |
0.0526 | -0.0015 | 102.85 | ||
0.0265 | -0.0007 | 102.64 | ||
SC Aircraft & Metal Cleaner | 0.0315 | -0.0001 | 100.32 | 78.5 |
0.0232 | -0.0006 | 102.57 | ||
0.0046 | 0.0031 | 32.61 | ||
Shopmaster LPH | 0.0091 | -0.0017 | 118.68 | 106.71 |
0.0400 | -0.0028 | 107.00 | ||
0.0289 | 0.0016 | 94.46 |
Success Rating:
Results successful using TACT (time, agitation, concentration, and temperature, as well as rinsing and drying) and/or other cleaning chemistries examined.Conclusion:
Shopmaster LPH was the most effective cleaner removing an average of 106.71% of soil from the steel coupons. Mirachem 500 was the second most effective removing an average of 100.85%, and Metalnox 6386 was the third most effective removing an average of 92.87. The next steps would be to test on company steel coupons.