Default object view. Click to create a custom template, Node ID: 5723, Object ID: 5722

Trial #0

Trial #0

To develop a new cleaning system to replace vapor degreasing w/ Trichloroethylene

1999

6

2

140

140

Coupon

03/25/1999

5.00

Immersion/Soak

Jason Marshall

Brass

Tap water rinse

Heat Gun

Gravimetric

Eight cleaning chemistries were selected based on vendor supplied information and searching the lab’s Effective Test Conditions Database. The cleaners were diluted to 5% by volume in 400 mL glass beakers and then heated to 130 F on a hot plate.
Twenty-four preweighed coupons were contaminated with a buffing compound and weighed again. Three coupons were cleaned for 5 minutes in a beaker using stir bar agitation. Coupons were rinsed in tap water at 120 oF for 30 seconds and dried using a Master Appliance Corp, Hot-air gun model HG-301A at 500 F for one minute. After the coupons cooled to room temperature, a final clean weight was recorded and cleaning efficiencies were calculated.

SUBSTRATE MATERIAL: Brass Coupons
CONTAMINANTS: Buffing Compound (Anchor Chemical Co, Anchor Spin G-10)
CONTAMINATING PROCESS USED: Compound rubbed onto coupons

There were two cleaners which had excellent removal of the buffing compound, two which had moderate removal and the remaining four had little removal of the contaminant. Table 1 shows the cleaning efficiencies for each cleaner.

Table 1. Cleaning Efficiencies

Product 2215 212 820 N SC 1000 Micro 90 790 P CMF 240 3800
Coupon 1 99.63 25.71 48.96 18.48 45.61 65.73 66.83 97.74
Coupon 2 99.73 10.03 52.71 22.59 70.44 78.25 70.23 99.83
Coupon 3 99.93 28.94 41.54 15.73 39.39 23.67 77.48 97.58
Ave 99.76 21.56 47.74 18.93 51.81 55.89 71.51 98.39
Std Dev 0.15 10.11 5.68 3.45 16.43 28.59 5.44 1.26

Even though Calgon’s Geo-Guard 2215 and Oakite’s Inproclean 3800 removed nearly all of the contaminant, there was a noticeable layer of buffing compound still on the coupons.  US Polychem’s 790 P had good removal on two of the coupons.  One way to increase the removal of the contaminant would be to increase the concentration of the cleaning solutions.  Another way would be through the use of ultrasonics.

Four cleaning solutions (Calgon, Oakite, US Polychem and Chirsal) will be used in the next trial.  Coupons will be cleaned using increased concentration of the solutions.

No relation

Name Class Section
Document Evaluation #0 Evaluation 3
Document Evaluation #1 Evaluation 3
Document Evaluation #2 Evaluation 3
Document Evaluation #3 Evaluation 3
Document Evaluation #4 Evaluation 3
Document Evaluation #5 Evaluation 3
Document Evaluation #6 Evaluation 3
Document Evaluation #7 Evaluation 3
Powered by eZ Publish™ CMS Open Source Web Content Management. Copyright © 1999-2014 eZ Systems AS (except where otherwise noted). All rights reserved.