Default object view. Click to create a custom template, Node ID: 28378, Object ID: 49643

Trial #4

Trial #4

Determining the efficacy of Case Medical's Ink and Adhesive remover on autoclave tape adhesive residue

2023

31

4

33

33

Coupon

08/21/2023

0.00

Manual Wipe

Adhesive

None

None

Visual

After input from the client, this experiment was altered to better fit the needs of the company. Coupons were cleaned prior to testing, and 3 of each substrate were used for this test; Anodized Aluminum, Glass, Plastic, and Stainless Steel. Autoclave tape was taped along the middle of each coupon, and then heated in the oven for 30 minutes at 250 degrees Fahrenheit. Following heating, the tape was removed from the coupons in such a way that as much adhesive was left behind on the coupon surface as possible.  Pictures were then taken of the "soiled" coupons, and were visually evaluated using the standard cleanliness evaluation scale, with a value from 1 to 5 being assigned. 5 being the most dirty, and 1 being the most clean. 3 lab staff were used for evaluation values, labeled as A, B, and C. Next, the coupons were individually loaded onto the straight line washability unit. Using a microfiber cloth, the case medical product was sprayed 6 times on the surface of the coupon and twice on the microfiber towel, and then run for the standard 20 cycles. Finally, pictures of the coupons after cleaning were taken, and were rated on the same scale as they were prior. 

Visual Analysis Results Table:

  Dirty Clean    
Substrate A B C A B C Average of Cleaned Substrate Overall Average
Anodized Aluminum 5 5 5 5 5 5 5 5
5 5 5 5 5 5
5 5 5 5 5 5
Glass 5 5 5 5 5 5 5
5 5 5 5 5 5
5 5 5 5 5 5
Plastic 5 5 5 5 5 5 5
5 5 5 5 5 5
5 5 5 5 5 5
Stainless Steel 5 5 5 5 5 5 5
5 5 5 5 5 5
5 5 5 5 5 5

Autoclave_tape_final

4 substrates of 3 coupons each soiled with autoclave tape adhesive after being cleaned

Image 1: Coupons after being cleaned

case_ medical_Aluminum_autoclavetape_soiled

picture of anodized aluminum coupons after being soiled with autoclave tape adhesive, but prior to being cleaned

Image 2: Aluminum coupons prior to cleaning

casemed_glass_autoclavetape_dirty

glass coupons after being soiled with autoclave tape adhesive prior to being cleaned

Image 3: Glass coupons prior to cleaning

casemed_plastic_autoclavetape_dirty

plastic coupons after being soiled with autoclave tape adhesive residue prior to being cleaned

Image 4: Plastic coupons prior to cleaning

casemed_autoclave_steel

stainless steel coupons after being soiled with autoclave tape adhesive residue prior to being cleaned

Image 5: Stainless Steel coupons prior to cleaning

Based on the results above, the case medical adhesive remover had little to no effect on removing the autoclave tape adhesive residue. 

No relation

Powered by eZ Publish™ CMS Open Source Web Content Management. Copyright © 1999-2014 eZ Systems AS (except where otherwise noted). All rights reserved.