Default object view. Click to create a custom template, Node ID: 7392, Object ID: 7391

Trial #0

Trial #0

To evaluate three supplied products for all purpose cleaning following GS 37 requirements

2014

22

2

0

0

Coupon

11/12/2014

0.50

Manual Wipe

There are no related objects.

Stainless Steel

Hucker's Soil

None

Air dry

Gravimetric

Two of three supplied cleaning products were diluted with DI water at room temperature to vendor recommended concentration for all purpose cleaning (32:1 and 128:1). The third product was prepared following the specified procedure - oxygenating cold tap water for about 10 minutes.

Preweighed ceramic, plastic G-10 and painted steel coupons were coated with Hucker's Soil Formulation (Jif Creamy Peanut Butter,Salted Butter, Arrowhead Mills stone ground wheat flour, Egg Yolk, Evaporated milk, Distilled water, Printer's ink with boiled linseed oil, Shaws saline solution) using a hand held swab and allowed to dry for 24 hours at room temperature. The contaminated coupons were weighed again to determine the amount of soil added.

Three coupons were placed into a Gardner Straight Line Washability unit. A Kimberly-Clark Wypal reinforced paper towel was attached to the cleaning sled and soaked with 1 spray of cleaning solution. Each coupon was sprayed once with the same cleaning solution. The cleaning unit was run for 20 cycles (~33 seconds). At the end of the cleaning, coupons were wiped once with a dry paper towel. Final weights were recorded, efficiencies were calculated and recorded.

Chemistries Evaluated: Elevance 10%, Elevance 50%, Elevance 100%

Cleaner  Initial wt Final wt % Removed
ElevanceCleaner_10%_HuckerSoil_StainlessSteel      
  0.6828 0.1750 74.37
  0.6329 0.0605 90.44
  0.4695 0.0147 96.87
ElevanceCleaner_50%_HuckerSoil_StainlessSteel      
  0.5505 0.0614 88.85
  0.6014 0.0352 94.15
  0.6153 0.0447 92.74
ElevanceCleaner_100%_HuckerSoil_StainlessSteel      
  0.6527 0.0669 89.75
  0.6230 0.0558 91.04
  0.7770 0.0656 91.56

Each of the concentrations proved effective at cleaning the substrate. The 50% and 100% dilutions showed similar levels of cleaning, while the 10% dilution performed the worst.

No relation

Name Class Section
Document Evaluation #0 Evaluation 3
Document Evaluation #1 Evaluation 3
Document Evaluation #2 Evaluation 3
Powered by eZ Publish™ CMS Open Source Web Content Management. Copyright © 1999-2014 eZ Systems AS (except where otherwise noted). All rights reserved.