Twelve sets of stainless-steel coupons were weighed, each set consist of three coupons. The first six sets were soiled with GS 34 Soil-1 and the other six sets were soiled with GS 34 Soil-2. Both soils were applied at the loading of ~100mg. The soiled coupons were oven dried for 30 minutes with 40 °C for GS 34 Soil-1 and 105 °C for GS 34 Soil-2. Dirty weights were recorded for all of the coupons.
The Naturama Degreaser was supplied ready to use concentration. For manual wipe testing, three coupons were placed in a Gardner Straightline Washability unit and spray with a cleaning solution and allowed to soak for 1 minute. After soaking, the unit was run for 20 cycles (33 seconds) followed by a quick spray rinse using tap water at room temperature. Final weights were recorded the following day. Efficiencies were calculated and recorded. For Immersion testing, three coupons were placed in a 500mL beaker and fully immersed in Naturama Degreaser for 30 minutes. Coupons were placed standing up and soiled side facing away from one another. Coupons were left to dry overnight after the immersion process. Final weights were taken the next day.
Soil 1: Maintenance soil = 10 grams of carbon black, 10 grams iron oxide, 100 ml WD-40, 100 ml hydraulic oil, and 100 ml gear oil.
Soil 2: Production soil = 200 ml Quench Oil and 200 ml cutting oil
The Naturama Degreaser was very effective in the removal of GS-34 soils during manual wipe testing. The highest removal efficiency was approximately 99% for maintenance soil (soil1) and 97% for production soil (soil 2) on the stainless-steel coupons. During immersion testing, Naturama Degreaser was only effective on soil 2 at 86%. Using immersion testing on soil 1 showed an efficiency of less than 1%. A follow up test showed a similar result of less than 1% removal efficiency for immersion testing of soil 1.