Basic cleaning performance testing was conducted using ASTM G122 as the bases for cleaning.
Seven products were heated to 130 F on a hot plate and one product was used at full strength. Twenty four preweighed coupons were coated with Cutting Fluid - Monroe Fluid Tech Cool Tool II and allowed to dry for a half an hour and reweighed. Three coupons were cleaned in each solution for 5 minutes using stir-bar-agitation, rinsed in a tap water bath for 15 seconds at 120 F and dried using air blow off for 30 seconds at 68 F. Coupons were allowed to dry for a half an hour and then reweighed a final time. Efficiencies were calculated.