Default object view. Click to create a custom template, Node ID: 39224, Object ID: 60974

Trial #10

Trial #10

To determine the efficacy of hydrocarbon Metalnox M6381 chemistry in removing various industrial soils without the assistance of vacuum vapor degreasing equipment.

2026

32

2

0

0

Coupon

11/03/2026

0.00

Immersion/Soak

Evan Hebert

Aluminum

None

Air dry

Xray fluoresence

Three Aluminum coupons were assigned to each of 2 industrial soils; Richards-Apex #201 Lubel and Richards-Apex #226 Lube.  Each coupon was weighed using a gravimetric balance and had their initial weights recorded.  Each coupon was then soiled with a pea sized amount of the appropriate soil using a swab to spread it across the surface of the coupons.  Each coupon was weighed again and had their dirty weights recorded.  The coupons were then immersed in a beaker of the Metalnox M6381 hydrocarbon with a stir bar set to 200rpm for 10 minutes.  Upon removal from the beaker, the coupons were allowed to air dry for 20 minutes before being weighed and having their final weights recorded.  

Analysis:

The recorded reflectance values of each coupon were used within an equation to generate a percentage representative of how close the clean reflectance value is to the initial reflectance value.  It estimates how closely the coupons were returned to their original state after vacuum vapor degreasing.  The equation is as follows

%=(Rclean-Rdirty/Rinitial-Rdirty)X100

Soil Initial RFU Dirty RFU Clean RFU %DET AVG
Richards-Apex #201 Lube 68.2 2778.4 779.1 73.77 27.09
136.3 2758.7 2562.2 7.49
68 2637.3 2637.1 0.01
Richards-Apex #226 Lube 5.8 2783 2772.4 0.38 14.17
9.2 2772.5 2278.5 17.88
21.2 2773.3 2105.7 24.26

Metalnox M6381 hydrocarbon was not successful in removing either Richards-Apex Lube soil from Aluminum.

No relation

Powered by eZ Publish™ CMS Open Source Web Content Management. Copyright © 1999-2014 eZ Systems AS (except where otherwise noted). All rights reserved.