Default object view. Click to create a custom template, Node ID: 5327, Object ID: 5326

Trial #11

Trial #11

Summary of testing performed on alternatives for paint removal from steel spindles.

2006

13

8

136

136

Part

06/05/2006

0.00

No relation

Jason Marshall

Steel

Paints

There are no related objects.

There are no related objects.

There are no related objects.

Ten trials were conducted on the various paints used in painting golf balls. During the evaluations, one of the current cleaning chemicals was used as a bench mark. Successful products were identified that could be used to clean the manufacturing equipment, i.e. spindles.

Oakite Products Inproclean 4000 T and International Products Surface Cleanse 930 were effective on the RPM Wood Finishes Group paint combinations. The Inproclean 4000 T was also effective for the Westfield Coatings Company paints and the water based coating as well. However Surface Cleanse 930 did not remove enough of the paint to be considered successful. A third product, Gemtek Products SC Actisolv, was tested on the Westfield Coatings Company and the water based coating. This product was effective on the supplied spindles.

Follow up testing on the RPM Wood Finishes Group paints using coupons showed that SC Actisolv was very effective in removing the two RPM Wood Finishes Group paints and the Westfield Coatings Company paint.

The table summarizes the testing for the various paint mixtures on the steel based substrates. Products with empty cells were not tested for that paint mixes. The eight paint combinations are described as well.

Table 1. Steel Cleaning Summary

Product Mix # 1 2 3 4 5 6 7 8
D Solve 1012-current solvent Yes Yes Yes   Yes   Yes  
Solsafe 245         Yes Yes Yes No   No    
Aquavantage 3800 GD Yes Yes Yes          
Shopmaster No              
Optisolv OP7171     No              
Inproclean 4000 T   Yes Yes Yes Yes Yes Yes Yes Yes
Beyond 2006         Yes No            
A 2000 XS           Yes Yes No No        
Surface Cleanse 930 Yes Yes Yes Yes No   No  
SC Aircraft & Metal Cleaner         No      
Citrus Burst 7         Yes No    
Canola gold CE 110         No      
Shopmaster RC         No      
SC Actisolv Yes Yes     Yes Yes Yes Yes
DBE 5/6             No  

Table 2. Paint Mix Components

Paint Mix 1 Paint Mix 2 Paint Mix 3 Paint Mix 4 Paint Mix 5 Paint Mix 6 Paint Mix 7 Paint Mix 8

RPM Wood Finishes Group.

MS2664 Catalyst White (108-10-1, 28182-81-2, 822-06-0)

MS2669 Primer (108-10-1, 28182-81-2, 822-06-0)

RPM Wood Finishes Group

MS2664 Catalyst White (108-10-1, 28182-81-2, 822-06-0)

9-6LP9258 White Primer Topcoat (13463-67-7, 110-43-0, 123-86-4, 108-10-1, 108-38-3)

Paint Mix 1

Paint Mix 2

 

RPM Wood Finishes Group paint mixtures

Oil, dirt and grime

Westfield Coatings Company

ARC Fast Dry (108-10-1)

ARC Fast Dry Catalyst (123-86-4, 110-43-0, 108-65-6)

Paint Mix 5

Oil, dirt and grime

Witcobond W-235 (71173-87-0)

Crosslinker (64265-57-2)

DI water

 Paint Mix 7 Oil, dirt and grime
Ratio 3:1 Ratio 3:1 Ratio 1:1   Ratio: 2:1   Ratio: 40:2:1  

Oakite Inproclean 4000 T and Gemtek SC Actisolv were successful on each of the paints. Both products cleaned the supplied spindles very well when using ultrasonic energy.

No relation

Powered by eZ Publish™ CMS Open Source Web Content Management. Copyright © 1999-2014 eZ Systems AS (except where otherwise noted). All rights reserved.