Default object view. Click to create a custom template, Node ID: 37011, Object ID: 58494

Trial #2

Trial #2

Descaling efficacy testing of Virdivis FB-1000 at various concentrations compared to CLR.

24

30

2

0

0

Coupon

11/11/2024

30.00

Immersion/Soak

Tatyanna Moreland Junior

Marble

Calcium/Scale

DI water rinse

Heat Gun

Gravimetric
Visual

Four marble blocks (2"x2") were tested using solutions of FB1000 at concentrations of 10%, 2%, and 1%, as well as CLR at 50%. Initial weights of the blocks were recorded before immersion. Each block was submerged in its designated solution within a beaker, and observations of dissolution, discoloration, or other changes were documented at 1, 5, 10, 15, and 30-minute intervals. After 30 minutes, the blocks were rinsed under deionized water for 15 seconds and dried with a heat gun set to 500°F for two minutes. The blocks were then allowed to cool to room temperature for two hours. Final weights were measured, and observations of any additional changes were recorded.

Code Cleaner Dilution
A CLR 50%
B FB-1000 10%
C FB-1000 2%
D FB-1000 1%
Cleaner Initial wt Final wt Wt loss Time (min) Observation
A 16.0441 15.1640 0.8801 1 Very fizzy; cloudy
5 Very fizzy; still cloudy
10 Very fizzy; very still cloudy
15 Very fizzy; very still cloudy
30 Very fizzy; very cloudy; soft
B 15.7732 15.6949 0.0783 1 a little cloudy
5 cloudy; fizzy
10 cloudy; fizzy
15 cloudy; not as much fizz
30 very cloudy
C 15.8808 15.8460 0.0348 1 no change
5 no change
10 small fizz; little cloudy
15 small fizz; little cloudy
30 small fizz; cloudy
D 16.1105 16.0973 0.0132 1 no change
5 no change
10 little fizz
15 little fizz
30 little fizz

CLR (50%) produced a stronger reaction and resulted in greater marble dissolution compared to the FB-1000 dilutions. It also changed the color of the marble from light brown to a deeper brown after rinsing with DI water and drying. In contrast, the FB-1000 dilutions did not alter the color of the marble blocks like CLR did, but there was still measurable weight loss on each block, even though the reaction and weight loss amount decreased with the lower concentrations.

The FB-1000 concentrations demonstrated effectiveness in dissolving marble blocks, indicating their potential as a calcium remover or descaler. Among the tested dilutions, the 10% solution was the most effective and showed performance closest to the comparative product, CLR (50%).

No relation

Name Class Section
Document Evaluation #0 Evaluation 3
Document Evaluation #1 Evaluation 3
Document Evaluation #2 Evaluation 3
Document Evaluation #3 Evaluation 3
Powered by eZ Publish™ CMS Open Source Web Content Management. Copyright © 1999-2014 eZ Systems AS (except where otherwise noted). All rights reserved.