Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 1

Trial Purpose:

Control testing to monitor bathroom soil consistency.

Date Run:

12/15/2021

Experiment Procedure:

Nine pre-weighed coupons, three of each substrate per cleaner, were each contaminated with ~0.5 gram of bathroom soil (28.6% All-in-one shampoo and conditioner, 21.4% Dry skin lotion, 21.4% Liquid Hand Soap, 14.3% Liquid body wash, 7.2% Deodorant bar soap, 7.1% Water). The dirty weights were recorded after the coupons had dried for 24 hours at room temperature (68 F). Three coupons of the same substrate were aligned into a Single Line Washing Unit (SLW) with The Wypall X60 attached to the cleaning sled. The Wypall X60 reinforced wipe along with the coupons were all sprayed two times with the cleaner and then allowed to soak for 30 seconds. Afterwards the Single Line Washing Unit (SLW) was activated and cleaned for 20 cycles. The clean coupons were all then allowed to dry overnight at room temperature before the final weights were recorded.

Trial Results:

Cleaner Substrate Initial wt of cont. Final wt of cont. %Cont Removed % AVG % Overall
Water Chrome 0.5220 0.0840 83.91 84.97 85.83
0.8444 0.1341 84.12
0.4601 0.0604 86.87
Ceramic  0.5715 0.0834 85.41 85.85
0.5232 0.0776 85.17
0.5299 0.0690 86.98
Plastic 0.6144 0.0802 86.95 86.67
0.5535 0.0590 89.34
0.5220 0.0850 83.72

Success Rating:

Results successful using TACT (time, agitation, concentration, and temperature, as well as rinsing and drying) and/or other cleaning chemistries examined.

Conclusion:

The overall removal percentage for this control test was 85.83%.

Save Report as a PDF