Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 2

Trial Purpose:

To evaluate Kyzne lonoc HC 2 as a replacement for Ensolv for flux removal

Date Run:

05/18/2001

Experiment Procedure:

The cleaning product, lonox HC2, was used at full strength. It was heated to 60 C in a VWR Scientific Products Aquasonic 150 HT 40 kHz ultrasonic tank. The solution was degassed for 5 minutes.
A basket containing dirty parts was submersed into the heated solution and cleaned for 5 minutes. After cleaning, the basket/parts were rinsed first in tap water and then Dl water. The parts were dried using an oven (120 C) and a Mast Appliance Corp, Hot-air gun model HG-301A. Parts were inspected under a microscope for cleanliness. Parts were returned to facility for further inspection.

Trial Results:

The five minute cleaning of the parts appeared to be successful. Further analysis will be performed at the client's site.

Success Rating:

A follow up test, usually based on company input.

Conclusion:

Ionox HC 2 was successful in removing the flux from the supplied parts.

Save Report as a PDF