Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 0

Trial Purpose:

To evaluate supplied products for all purpose cleaning following GS 37 requirements

Date Run:

10/06/2014

Experiment Procedure:

The two cleaning products were used at the provided ready to use concentration at room temperature. Preweighed ceramic, plastic and painted metal coupons were coated with Hucker's Soil Formulation (creamy peanut butter, salted butter, stone ground wheat flour, egg yolk, evaporated milk, distilled water, printer's ink with boiled linseed oil, saline solution) using a hand held swab and allowed to dry for 2 hours at room temperature. The contaminated coupons were weighed again to determine the amount of soil added.
Three coupons were placed into a Gardner Straight Line Washability unit. A Kimberly-Clark Wypal reinforced paper towel was attached to the cleaning sled and soaked with 1-2 sprays of cleaning solutions. Each coupon was sprayed 1-2 times with the same cleaning solution. The cleaning unit was run for 20 cycles (~33 seconds). At the end of the cleaning, coupons were blotted once with a dry paper towel. Final weights were recorded, efficiencies were calculated and recorded.

ChemistriesEvaluated: Pure Care Products All Purpose; Seventh Generation All Purpose;

Trial Results:

The Pure Care product had the higher level of removal of the Hucker’s soil from the three surfaces using manual wiping. It removed about 70% of the Hucker’s soil. The Seventh Generation product removed about half of the soil under the laboratory conditions. The table lists the amount of soil added, the amount remaining after cleaning and the calculated efficiency for each coupon cleaned.

Cleaner  Initial wt Final wt  % Removed
Pure Care ceramic      
  0.5130 0.2679 47.78
  0.5166 0.1902 63.18
  0.5144 0.2536 50.70
Pure Care plastic      
  0.5978 0.1717 71.28
  0.6157 0.1561 74.65
  0.6078 0.1444 76.24
Pure Care painted metal      
  0.6130 0.0961 84.32
  0.6670 0.1018 84.74
  0.5874 0.1849 68.52
Seventh Gen ceramic      
  0.5554 0.2422 56.39
  0.5093 0.2697 47.04
  0.5251 0.2595 50.58
Seventh Gen plastic      
  0.5743 0.2479 56.83
  0.5400 0.2689 50.20
  0.5537 0.2330 57.92
Seventh Gen painted metal      
  0.5416 0.2560 52.73
  0.5239 0.0960 81.68
  0.5493 0.3995 27.27

Success Rating:

Results successful using TACT (time, agitation, concentration, and temperature, as well as rinsing and drying) and/or other cleaning chemistries examined.

Conclusion:

Pure Care Products was found to be more effective at removing the Hucker’s soil from various surfaces using manual wiping as compared with the Seventh Generation product.

Save Report as a PDF