Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 13

Trial Purpose:

To find a safer alternative to Startex Laquer Thinner for removing adhesive from laminate/wood parts.

Date Run:

06/24/2026

Experiment Procedure:

Six pieces of laminate and wood were cut to roughly similar sizes. Three beads of the Jowat 2886.0 hot-melt adhesive were places between the laminate and wood and melted with a heat gun to glue the pieces together with a minimal amount of adhesive hanging off the edge to simulate the problem the company is dealing with. After gluing, a 30 second manual wipe cleaning process was used to remove the leftover adhesive. The cleaners used were Citrus Burst 7 and Citrus Burst 8.

A rating system was used to conduct visual analysis on the removal of the adhesive and a rating key is provided:

Rating Description
0 No adhesive visible
0.5 Some adhesive visible
1 No adhesive removed

Trial Results:

  Clean Visual Ratings
Cleaner Coupon Rater 1 Rater 2 Rater 3 Rater 4 Cleaner Average
Citrus Burst 8 1 1 1 1 1 1
2 1 1 1 1
3 1 1 1 1
Citrus Burst 7 4 1 1 1 1 1
5 1 1 1 1
6 1 1 1 1

Dirty Coupons

Dirty Coupons

Cleaned Coupons

Cleaned Coupons

Success Rating:

Test showed little or no promise.

Conclusion:

Citrus Burst 7 & 8 were not found to be effective at removing adhesive from the substrate.

Save Report as a PDF