Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 158

Trial Purpose:

Laboratory evaluations of alternative cleaning products

Date Run:

02/24/2002

Experiment Procedure:

Basic cleaning performance testing was conducted using ASTM G122 as the bases for cleaning.

Cleaning: 5 min Immersion cleaning with stir-bar agitation @ 120 F
Rinsing: 1/2 min, manual, in 102 F water (tap)
Drying: 1 min with heat gun @ 500F
Contaminant: Aroset PS 8078, Ashlan Chemical (Lot# 071901). Very thick adhesive
CAS#'s 141-78-6 Et

Trial Results:

278 Super Solv: Contaminant either adsorbed water or the cleaner reacted with the adhesive and deposited on the coupon.

Dirtex: Like 2878 Supersolve, the coupons in this cleaner picked up significant weight. The cleaner could have reacted with the contaminant, or it could have facilitated the adoption of water into the contaminant.

FO 2085 M: A large increase in weight was observed in all three coupons in the trial for this cleaner. Explanations could be absorption of cleaner or water into or onto the adhesive or chemical reaction between the cleaner and adhesive.

Success Rating:

Preliminary compatibility tests on substrate coupons encouraging for at least one cleaning chemistry. More in-depth laboratory testing necessary.

Conclusion:

All of the cleaners performed very poorly, none were effective. In the case of the Supersolve 2878 and the Geoguard 5210 the weight of the coupons increased significantly, one possible explanation could be the actually trapped some of the cleaner or waste.

Save Report as a PDF