Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 3

Trial Purpose:

To find a drop in solvent alternative to TCE for vapor degreasing lighting fixtures

Date Run:

01/16/2008

Experiment Procedure:

Preweighed 2 inch by 4 inch brass coupons were contaminated with one of three buffing compounds supplied by client. The red buffing compound was the most used and hardest to remove. The buffing compound was heated with a Master Appliance heat gun in order to transfer it to the coupons effectively. Once cool, coupons were reweighed to determine the amount of buffing compound added.

The coupons were then cleaned by immersion cleaning with stir bar agitation for 5 minutes in heated solutions at 85 F approximately. The coupons were removed from the solutions and wiped once with a paper towel, then let to cool and weighed a third time. The coupons were not rinsed.

All solvents used were used at 100% concentration. The solvents were picked by chemical class in order to try a wide range of solvents on the client’s contaminant.

Trial Results:

Four of the six solvents removed the contaminant at an efficiency above 95%. One was lower, AK 225, at 83.33 percent and one was higher, DOW OS 30, at 103.70% removal efficiency. The OS 30 could possibly be damaging the brass, which is a soft metal, so it will not be used in further testing for this client. One HFC, Microcare, and the two nPB solvents will be looked at further and used in vapor degreasing client supplied parts. The table lists the amount of soil added, the amount remaining and the efficiency for each coupon cleaned.

Cleaner Initial wt Final wt % Removed
AK 225 0.8915 0.3334 62.6
  0.7056 0.0157 97.77
  0.7301 0.0758 89.62
Heavy Duty Degreaser 0.8109 0.0037 99.54
  1.102 0.0064 99.42
  0.7564 0.0038 99.5
Metalnox M6960 1.2294 -0.0118 100.96
  0.7585 -0.0009 100.12
  1.5134 -0.0009 100.06
Vertrel XP 10 1.1882 0.0147 98.76
  1.0978 0.0046 99.58
  0.8068 0.0989 87.74
Lenium CP 0.7858 0.0061 99.22
  0.7668 0.0008 99.9
  0.7729 0.0006 99.92
OS 30 0.7092 -0.0786 111.08
  0.5177 -0.0008 100.15
  1.3033 0.0016 99.88

Success Rating:

A follow up test, usually based on company input.

Conclusion:

Heated immersion testing on the clients most frequently used buffing compound was done using solvents that are potential drop in replacements for TCE in the companies vapor degreaser.  Four of the 6 solvents tested are possible candidates for the next step of vapor degreasing client supplied parts.

Save Report as a PDF