Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 3

Trial Purpose:

To evaluate one product on first supplied buffing compound using immersion cleaning.

Date Run:

09/05/2006

Experiment Procedure:

The product was diluted to 5% in 250 ml beakers using DI water and heated to 130 F on a hot plate.

Three preweighed coupons were coated with the brown buffing compound using a handheld swab. Coupons were weighed a second time to determine the amount of buffing compound added. Three coupons were cleaned in each solution for five minutes using minimal stir bar agitation. Coupons were rinsed for 15 seconds in a tap water bath at 120 F and dried using a dry compressed air for 30 seconds. Once dry coupons were weighed a final time and product efficiencies were calculated.

Trial Results:

The Detergent 8 cleaner removed over 90% of the brown buffing compound within 5 minutes of immersion cleaning. The following table lists the amount of buffing compound applied, the amount remaining and the efficiency for each coupon cleaned.

Cleaner Initial wt Final wt % Removed
Detergent 8 0.2418 0.0203 91.60
  0.1786 0.0064 96.42
  0.1777 0.0202 88.63

Success Rating:

A follow up test, usually based on company input.

Conclusion:

Detergent 8 was effective on the buffing compound.

Save Report as a PDF