Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 1

Trial Purpose:

To further evaluate successful cleaners on additional contaminants.

Date Run:

07/14/2000

Experiment Procedure:

Four cleaners were selected from the previous trial based on the effective cleaning results obtained. All were diluted to 5% by volume using DI water in 600 ml beakers and heated to 130 F in the ultrasonic tank filled with tap water. Twelve preweighed coupons were coated with the grease using a swab and weighed a second time. Three coupons were immersed in the beakers in the ultrasonic unit. Initial observations were made at 5 minute intervals. After 20 minutes, coupons were removed from the ultrasonic energy and rinsed for 30 seconds in tap water at 120 F. Drying was performed with a Master Appliance Corp, Hot-air gun model HG-301A for one minute at 500 F. Coupons were weighed a final time and cleaning efficiencies were calculated.

SUBSTRATE MATERIAL: Aluminum Coupons
CONTAMINANTS: Cello-Seal, Grease
CONTAMINATING PROCESS USED: Grease applied using hand held swab

Trial Results:

The Today & Beyond and United Laboratories’ products were successful in removing 90% of the grease from the aluminum coupons. The WR Grace product had one coupon that was 93% clean but the other two coupons were well under 50%. Table 2 shows the efficiencies for the four cleaners evaluated in the trial.

Table 2. Final Coupon Weights

20 minutes Heatbath T&B UL WR Grace
Coupon 1 32 99.21 97.19 30.03
Coupon 2 52.79 90.36 81.6 43.21
Coupon 3 23.9 97.85 91.08 92.71
Average 36.23 95.81 89.95 55.32

Success Rating:

Results successful using TACT (time, agitation, concentration, and temperature, as well as rinsing and drying) and/or other cleaning chemistries examined.

Conclusion:

The uncleaned parts will be cleaned in the Today & Beyond and United Laboratories products using ultrasonic energy.  The clean parts will be returned for inspection by the client.

Save Report as a PDF