Browse Client Types

Browse past lab clients by general industry sectors

Trial Number 6

Trial Purpose:

To clean supplied parts using the six effective products and ultrasonic energy.

Date Run:

07/23/2004

Experiment Procedure:

The six products that were found to be effective on all three soils were used at 120 F in a Crest Ultrasonic 40 KHz tank. Five products were used at 5% dilutions in 600 ml beakers and the sixth was used as received from the client in a 400 ml beaker. Each beaker was submersed in the tank filled with water at 120 F and degassed for 5 minutes.
Four to five parts were cleaned in each product for five minutes with ultrasonic energy. The parts were rinsed in tap water at 120 F for 30 seconds and dried using airblow off at room temperature for 30 seconds. Parts were visually inspected and then packaged. Parts were sent back to client to determine effectiveness.

Possible soils: Castrol Industries Rustilo 4163 (64742-46-7, 8002-74-2, 34590-94-8); Castrol Industries Rustilo DW 924 (64742-88-7, 64742-95-6, 64741-89-5, 64741-97-5, 64742-53-6, 95-63-6)

Trial Results:

Most of the parts appeared to be cleaned well. Two rings, one cleaned in M-Aero and the other in Alkalume LN had some visual signs of soil on the outside of the rings.

Success Rating:

A follow up test, usually based on company input.

Conclusion:

Parts will be tested at client for final effectiveness.

Save Report as a PDF