Browse past lab clients by general industry sectors
To evaluate top products at two concentrations and an elevated temperature.
The top five products were selected from the previous lab trial. Products were diluted to 5% using DI water in 300 ml glass beakers. Water also was used. Solutions were heated to 130 F. The beakers, were immersed in a water bath in a Branson 40 kHz ultrasonic tank. Products were degassed for five minutes.
A set of three soiled steel parts (with metal grit/fines) were immersed into each product and cleaned for 5 minutes using ultrasonic agitation. Following cleaning, coupons were observed for cleanliness.
As in the previous trial Daraclean 282 GF cleaned parts at both 5 and 10% dilutions at 130 F were visually the cleanest. At 5%, Polyspray Jet 790xs was the next cleanest followed by M Aero. At 10% these two products were reversed with M Aero having cleaning parts than 790xs.
|Product||5 Min Rank||10 Min Rank|
Success Rating:A follow up test, usually based on company input.
Heating the cleaning products yielded the cleanest parts. In each of the trials, Daraclean 282 GF yielded the cleanest parts for the metal grit removal. Photos of parts are included below for 5 and 10% cleaning at 130F.